3com MSR 20-20 참조 매뉴얼

C

HAPTER

 45: CPOS I

NTERFACE

 C

ONFIGURATION

 C

OMMANDS

# Shut down CPOS physical interface 1/0.

<Sysname> system-view

[Sysname] controller cpos 1/0

[Sysname-Cpos1/0] shutdown 

t1 t1-number channel-set set-number timeslot-list range [ speed { 56k | 64k } ]

undo t1 t1-number channel-set set-number

CPOS interface view

t1-number: Number of a T1 channel on the CPOS interface, in the range 1 to 84.

set-number: Channel set number in the range 0 to 23.

timeslot-list range: Specifies a list of timeslots assigned to the channel set. The 
range argument is in the range of 1 to 24. While specifying timeslots, you can 
specify a single timeslot in the form of a number, or timeslots in a range in the 
form of number1-number2, or multiple timeslots in the form of number1, 
number2-number3.

speed { 56k | 64k }: Specifies how timeslots are bundled. If the 56k keyword 
applies, timeslots form an N 

× 56 kbps bundle. If 64k applies, timeslots form an N 

× 64 kbps bundle. If the speed is not specified, the default 64 kbps applies.

Use the t1 channel-set command to bundle timeslots on the T1 channel.

Use the undo t1 channel-set command to remove the bundle.

By default, timeslot bundling is disabled on T1 channels.

The serial interface formed by a timeslot bundle is numbered in the form of 
interface number/channel number:channel set number.

t1 unframed.

# Bundle timeslots on T1 channel 1.

<Sysname> system-view

[Sysname] controller cpos 1/0

[Sysname-Cpos1/0] t1 1 channel-set 1 timeslot-list 1-23 

# Enter the serial interface view after the bundling operation.

[Sysname-Cpos1/0] quit

[Sysname] interface serial 1/0/1:1

[Sysname-Serial1/0/1:1]