3com MSR 20-20 참조 매뉴얼
695
Use the undo naturemask-arp enable command to restore the default.
By default, the support for ARP requests from a natural network is disabled.
Example
# Enable the support for ARP requests from a natural network.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
View
User view
Parameter
all: Clears all ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface
specified by the argument interface-type interface-number.
specified by the argument interface-type interface-number.
Description
Use the reset arp command to clear ARP entries except authorized ARP entries
from the ARP mapping table.
from the ARP mapping table.
Note that with interface interface-type interface-number specified, the command
clears only dynamic entries for the interface.
clears only dynamic entries for the interface.
Related command:
arp static and display arp.
Example
# Clear all static ARP entries.
<Sysname> reset arp static