3com MSR 20-20 참조 매뉴얼
707
dhcp select server global-pool
Syntax
dhcp select server global-pool [ subaddress ]
undo dhcp select server global-pool subaddress
View
Interface view
Parameter
subaddress: Supports subaddress allocation. That is, the DHCP server and clients
are on the same network segment, and the server allocates IP addresses from the
address pool containing the network segment of the first subaddress if several
subaddresses exist.
are on the same network segment, and the server allocates IP addresses from the
address pool containing the network segment of the first subaddress if several
subaddresses exist.
Description
Use the dhcp select server global-pool command to enable the DHCP server
on an interface. After the interface receives a DHCP request from the DHCP client,
the DHCP server will allocate an IP address from the address pool.
on an interface. After the interface receives a DHCP request from the DHCP client,
the DHCP server will allocate an IP address from the address pool.
Use the undo dhcp select server global-pool subaddress command to
cancel the support for subaddress allocation.
cancel the support for subaddress allocation.
By default, the DHCP server is enabled on an interface.
Example
# Enable the DHCP server on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] dhcp select server global-pool
dhcp server detect
Syntax
dhcp server detect
undo dhcp server detect
View
System view
Parameter
None
Description
Use the dhcp server detect command to enable pseudo DHCP server detection.
Use the undo dhcp server detect command to disable the function.
By default, the function is disabled.
Example
# Enable pseudo DHCP server detection.
<Sysname> system-view
[Sysname] dhcp server detect