3com MSR 20-20 참조 매뉴얼
738
C
HAPTER
52: DHCP R
ELAY
A
GENT
C
ONFIGURATION
C
OMMANDS
<Sysname> display dhcp relay security
IP Address
MAC Address
Type
Interface
10.1.1.1
00e0-0000-0001
Static
Eth1/0
10.1.1.5
00e0-0000-0000
Static
Vlan2
---
2 dhcp-security item(s) found
---
display dhcp relay security statistics
Syntax
display dhcp relay security statistics
View
Any view
Parameter
None
Description
Use the display dhcp relay security statistics command to display statistics
information about bindings of DHCP relay agents.
information about bindings of DHCP relay agents.
Example
# Display statistics about client address binding entries.
<Sysname> display dhcp relay security statistics
Static Items
:1
Dynamic Items
:0
Temporary Items
:0
All Items
:1
display dhcp relay security tracker
Syntax
display dhcp relay security tracker
View
Any view
Parameter
None
Table 132 Description on fields of the display dhcp relay security command
Field Description
IP Address
Client IP address
MAC Address
Client MAC address
Type
Type of binding, including dynamic and static
Interface
Layer 3 interface connecting to the DHCP client. If no interface is
recorded in the binding entry, “N/A” is displayed.
recorded in the binding entry, “N/A” is displayed.
Table 133 Description on fields of the display dhcp relay security statistics command
Field Description
Static Items
Static client address binding items
Dynamic Items
Dynamic client address binding items
Temporary Items
Temporary client address binding items
All Items
All client address binding items