3com MSR 20-20 참조 매뉴얼
848
C
HAPTER
65: IP
V
6 B
ASICS
C
ONFIGURATION
C
OMMANDS
Parameter
None
Description
Use the ipv6 fib-loadbalance-type hash-based command to specify the load
sharing mode based on the HASH algorithm for packet forwarding.
sharing mode based on the HASH algorithm for packet forwarding.
Use the undo ipv6 fib-loadbalance-type hash-based command to restore
the load sharing mode to the default.
the load sharing mode to the default.
By default, the load sharing based on polling is adopted, that is, each ECMP route
is used in turn to forward packets.
is used in turn to forward packets.
Example
# Specify the load sharing mode based on the HASH algorithm for packet
forwarding.
forwarding.
<Sysname> system-view
[Sysname] ipv6 fib-loadbalance-type hash-based
ipv6 host
Syntax
ipv6 host hostname ipv6-address
undo ipv6 host hostname [ ipv6-address ]
View
System view
Parameter
hostname: Host name, a string of up to 20 characters. The character string can
contain letters, numerals, “_”, “-”, or “.” and must contain at least one letter.
contain letters, numerals, “_”, “-”, or “.” and must contain at least one letter.
ipv6-address: IPv6 address.
Description
Use the ipv6 host command to configure the mappings between host names
and IPv6 addresses.
and IPv6 addresses.
Use the undo ipv6 host command to remove the mappings between host
names and IPv6 addresses.
names and IPv6 addresses.
Each host name can correspond to only one IPv6 address.
Example
# Configure the mapping between a host name and an IPv6 address.
<Sysname> system-view
[Sysname] ipv6 host aaa 2001::1
ipv6 icmp-error
Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error
View
System view