3com MSR 20-20 참조 매뉴얼

C

HAPTER

 69: IP

V

6 U

NICAST

 P

OLICY

 R

OUTING

 C

ONFIGURATION

 C

OMMANDS

# Permit the packets matching ACL 2000.

<Sysname> system-view

[Sysname] ipv6 policy-based-route aa permit node 10

[Sysname-pbr6-aa-10] if-match acl6 2000 

if-match packet-length min-len max-len

IPv6 policy-based-route view

min-len: Minimum IPv6 packet length in bytes, in the range of 0 to 65535.

max-len: Maximum IPv6 packet length in bytes, in the range of 1 to 65535. The 
value of max-len must be no less than that of min-len.

Use the if-match packet-length command to define a packet length match 
rule.

Use the undo if-match packet-length command to remove the match rule.

if-match acl6.

# Match the IPv6 packets with a length from 100 to 200 bytes.

<Sysname> system-view

[Sysname] ipv6 policy-based-route aa permit node 11

[Sysname-pbr6-aa-11] if-match packet-length 100 200 

ipv6 local policy-based-route policy-name

undo ipv6 local policy-based-route [ policy-name ]

System view

policy-name: Policy name, which uniquely identifies an IPv6 policy routing. It is a 
string of 1 to 19 characters.

Use the ipv6 local policy-based-route command to enable IPv6 system policy 
routing and reference a policy.

Use the undo ipv6 local policy-based-route command to disable IPv6 system 
policy routing.

IPv6 system policy routing is disabled by default.