3com MSR 20-20 참조 매뉴얼

By default, no listening port is configured on the RTC server.

Note that only one listening port can be configured.

# Configure the RTC server listening port number as 9010.

<Sysname> system-view

[Sysname] rta rtc-server listen-port 9010 

System view

None

Use the rta server enable command to enable terminal access on the router.

Use the undo rta server enable command to disable terminal access.

By default, terminal access is disabled on the router.

Note that, after terminal access is disabled, the settings of template, terminal, and 
VTY will be kept.

# Enable terminal access.

<Sysname> system-view

[Sysname] rta server enable 

rta source-ip ip-address

System view

ip-address: Source IP address used for establishing a TCP connection. It cannot be 
a loopback address, such as 127.0.0.1.

Use the rta source-ip command to configure the global source IP address of TCP 
connections.

Use the undo rta source-ip command to cancel the source IP address 
configured.