3com MSR 20-20 참조 매뉴얼

다운로드
페이지 2742
938
C
HAPTER
 71: IP R
OUTING
 T
ABLE
 C
OMMANDS
1.1.1.0/24
Direct 0
0
1.1.1.1
Vlan1
1.1.1.1/32
Direct 0
0
127.0.0.1
InLoop0
2.2.2.0/24
Direct 0
0
2.2.2.1
Vlan2
3.3.3.0/24
Direct 0
0
3.3.3.1
Eth1/0
3.3.3.1/32
Direct 0
0
127.0.0.1
InLoop0
4.4.4.0/24
Direct 0
0
4.4.4.1
Eth1/1
4.4.4.1/32
Direct 0
0
127.0.0.1
InLoop0 
display ip routing-table ip-prefix
Syntax
display ip routing-table ip-prefix ip-prefix-name [ verbose ]
View
Any view
Parameters
ip-prefix-name: IP Prefix list name, a string of 1 to 19 characters.
verbose: Displays detailed routing table information, including that for inactive 
routes. With this argument absent, the command displays only brief information 
about active routes.
Description
Use the display ip routing-table ip-prefix command to display information 
about routes permitted by a specified prefix list.
This command is intended for the follow-up display of routing policies. If the 
specified prefix list is not configured, detailed information about all routes (with 
the verbose keyword) or brief information about all active routes (without the 
verbose keyword) is displayed.
Examples
# Configure a prefix list named test, permitting routes with a prefix of 2.2.2.0 and 
a mask length between 24 and 32.
<Sysname> system-view
[Sysname] ip ip-prefix test permit 2.2.2.0 24 less-equal 32 
# Display brief information about active routes permitted by the prefix list test.
[Sysname] display ip routing-table ip-prefix test
Routes Matched by Prefix list : test
Summary Count : 2
Destination/Mask
Proto
Pre
Cost
NextHop
Interface
2.2.2.0/24
Direct
0
0
2.2.2.1
Vlan2
2.2.2.1/32
Direct
0
0
127.0.0.1
InLoop0 
For detailed description of the above output, see Table 204.
# Display detailed information about both active and inactive routes permitted by 
IP prefix list test.
[Sysname] display ip routing-table ip-prefix test verbose
Routes Matched by Prefix list
test :
Summary Count : 2
Destination: 2.2.2.0/24