3com MSR 20-20 참조 매뉴얼

C

HAPTER

 71: IP R

OUTING

 T

ABLE

 C

OMMANDS

Interface

: NULL0

Cost

: 0

Destination: 300::/64

Protocol

: Static

NextHop

: ::

Preference: 60

Interface

: NULL0

Cost

: 0  

Refer to Table 209 for description about the above output.

display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]

Any view

ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.

verbose: Displays both active and inactive verbose routing information. Without 
this keyword, only brief active routing information is displayed.

Use the display ipv6 routing-table ipv6-prefix command to display routes 
permitted by the IPv6 prefix list.

# Display brief active routing information permitted by the IPv6 prefix list abc2.

<Sysname> display ipv6 routing-table ipv6-prefix abc2

Routes Matched by Prefix list

abc

:

Summary Count : 1

Destination: 100::/64

Protocol

: Static

NextHop

: ::

Preference: 60

Interface

: NULL0

Cost

: 0 

Refer to Table 209 for description about the above output.

display ipv6 routing-table protocol protocol [ inactive | verbose ]

Any view

protocol: Displays the routes of a routing protocol, not including routes 
redistributed into the protocol. The protocol can be bgp4+, direct, isisv6, 
ospfv3, ripng or static.

inactive: Displays only inactive routes. Without the keyword, all active and 
inactive routes are displayed.

verbose: Displays both active and inactive verbose routing information. Without 
this keyword, only brief active routing information is displayed.

Use the display ipv6 routing-table protocol command to display routes of a 
specified routing protocol.