3com MSR 20-20 참조 매뉴얼
965
display bgp network
Syntax
display bgp network
View
Any view
Parameters
None
Description
Use the display bgp network command to display routing information
advertised with the network command.
advertised with the network command.
Examples
# Display routing information that has been advertised.
<Sysname> display bgp network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network
Mask
Route-policy
Short-cut
100.1.2.0
255.255.255.0
100.1.1.0
255.255.255.0
Short-cut
Configured hold timer value Holdtime
interval
Keepalive timer value
Keepalive interval
Minimum time between advertisement
runs
runs
Minimum time between advertisement runs
Peer Preferred Value
Preferred value of the routes from the peer
No routing policy is configured
No routing policy is configured for the peer
Members
Detailed information of the members in the peer
group
group
Peer
IPv4 address of the peer
V
BGP version running on peers
AS
AS number of the peers
MsgRcvd
Number of messages received
MsgSent
Number of messages sent
OutQ
Number of messages to be sent
PrefRcv
Number of prefixes received
Up/Down
The lasting time of a session/the lasting time of
present state (when no session is established)
present state (when no session is established)
State
State machine of peer
Table 215 Description on the fields of the display bgp group command
Field Description
Table 216 Description on the fields of the display bgp network command
Field Description
BGP Local Router ID
BGP Local Router ID
Local AS Number
Local AS Number
Network Network
address