3com MSR 20-20 참조 매뉴얼

C

HAPTER

 72: BGP C

ONFIGURATION

 C

OMMANDS

group-name: Name of a peer group, a string of 1 to 47 characters.

ip-address: IP address of a peer.

Use the peer next-hop-local command to specify the router as the next hop for 
routes to a peer/peer group.

Use the undo peer next-hop-local command to remove the configuration.

By default, routes advertised to an EBGP peer/peer group take the local router as 
the next hop, while routes to an IBGP peer/peer group do not take the local router 
as the next hop.

# In BGP view, set the next hop of routes advertised to peer group test to the 
router itself.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] peer test next-hop-local 

# In BGP-VPN instance view, set the next hop of routes advertised to peer group 
test to the router itself (the VPN has been created).

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpn-instance vpn1

[Sysname-bgp-vpn1] peer test next-hop-local 

peer { group-name | ip-address } password { cipher | simple } password

undo peer { group-name | ip-address } password

BGP view/BGP-VPN instance view

group-name: Name of a peer group, a string of 1 to 47 characters.

ip-address: IP address of a peer.

cipher: Displays the configured password in cipher text format.

simple: Displays the configured password in plain text format.

password: Password, a string of 1 to 80 characters when keyword simple is used, 
or when keyword cipher is included and plain text password is input; a string of 
24 or 108 characters when cipher text password and the keyword cipher are 
used.

Use the peer password command to configure BGP to perform MD5 
authentication when a TCP connection is being established with a peer/peer 
group.