3com MSR 20-20 사용자 설명서

다운로드
페이지 240
112
C
HAPTER
 3: M
ULTIFUNCTIONAL
 I
NTERFACE
 M
ODULES
Step 3: Check the LINK LED on the MIM-1POS panel: ON means the Rx link is 
present and OFF means the opposite. Check the line in the second case.
w
WARNING: Because invisible laser radiation may be emitted from the aperture of 
an optical port when no fiber is connected or the dust cap is removed, do not 
stare into the open aperture.
Replace the dust cap when no fiber is connected to the optical port.
MIM-2FXS/MIM-2FXO/
MIM-2E&M and 
MIM-4FXS/MIM-4FXO/
MIM-4E&M
Introduction
2/4-port voice subscriber circuit interface module (MIM-2FXS/MIM-4FXS) serves to 
access and handle 2/4 channels of ordinary analog phone, fax, or AT0 loop trunk 
of telephone exchange.
2/4-port voice AT0 analog trunk interface module (MIM-2FXO/MIM-4FXO) serves 
to access and handle 2/4 channels of common user lines of telephone exchange.
2/4-port voice E&M analog trunk interface module (MIM-2E&M/MIM-4E&M) 
serves to access and handle 2/4 channels of E&M analog trunks.
These modules make it possible to transfer voice signals over data communication 
networks.
c
CAUTION: When connecting a voice MIM, make sure that H3C Series Routers can 
be connected to an IP network or other LAN.
Interface Attributes
The interface attributes of MIM-2FXS/MIM-2FXO/MIM-2E&M and 
MIM-4FXS/MIM-4FXO/MIM-4E&M modules are given in the following table:
Table 73   Interface attributes of MIM-2FXS/MIM-2FXO/MIM-2E&M and 
MIM-4FXS/MIM-4FXO/MIM-4E&M
Attribute Description 
Connector RJ-45 
Number of connectors 
2 (MIM-2FXS/MIM-2FXO/MIM-2E&M 
module)
4 (MIM-4FXS/MIM-4FXO/MIM-4E&M 
module) 
Cable 
Telephone cable with ferrite core
E&M trunk (for E&M module, which 
should be made by users depending 
on the actual needs at the site.)