Xerox 6505n 사용자 가이드
Installation and Setup
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
User Guide
30
Connecting the Printer
This section includes:
•
•
•
•
•
Choosing a Connection Method
The printer can be connected to your computer using a USB cable or an Ethernet cable. The method
you choose depends on whether your computer is connected to a network. A USB connection is a direct
connection and is the easiest to set up. An Ethernet connection is used for networking. If you are going
to use a network connection, understand how your computer is connected to your network. For
example, if your computer is connected to the network by way of a router connected to a cable or DSL
modem. For more information, see
you choose depends on whether your computer is connected to a network. A USB connection is a direct
connection and is the easiest to set up. An Ethernet connection is used for networking. If you are going
to use a network connection, understand how your computer is connected to your network. For
example, if your computer is connected to the network by way of a router connected to a cable or DSL
modem. For more information, see
Note:
Hardware and cabling requirements vary for the different connection methods. Routers,
network hubs, network switches, modems, Ethernet, and USB cables are not included with your
printer and must be purchased separately.
printer and must be purchased separately.
•
Network: If your computer is connected to an office network or a home network, use an Ethernet
cable to connect the printer to the network. You cannot connect the printer directly to the
computer. It must be connected through a router or hub. An Ethernet network can be used for one
or more computers and supports many printers and systems simultaneously. Ethernet connection
is typically faster than USB and allows you direct access to the settings of the printer using
CentreWare Internet Services.
cable to connect the printer to the network. You cannot connect the printer directly to the
computer. It must be connected through a router or hub. An Ethernet network can be used for one
or more computers and supports many printers and systems simultaneously. Ethernet connection
is typically faster than USB and allows you direct access to the settings of the printer using
CentreWare Internet Services.
•
USB: If you connect the printer to one computer and do not have a network, use a USB
connection. A USB connection offers fast data speeds, but not as fast as an Ethernet connection.
In addition, a USB connection does not provide access to CentreWare Internet Services.
connection. A USB connection offers fast data speeds, but not as fast as an Ethernet connection.
In addition, a USB connection does not provide access to CentreWare Internet Services.
•
Telephone: The printer must be connected to a dedicated telephone line to send and receive
faxes.
faxes.
Connecting to a Network
To connect the printer to a network:
1.
1.
Make sure that the printer is turned off.
2.
Attach a category 5 or better Ethernet cable from the printer to the network or router socket. Use
an Ethernet hub or router, and two or more Ethernet cables. Connect the computer to the hub or
router with one cable, then connect the printer to the hub or router with the second cable. Connect
to any port on the hub or router except the uplink port.
an Ethernet hub or router, and two or more Ethernet cables. Connect the computer to the hub or
router with one cable, then connect the printer to the hub or router with the second cable. Connect
to any port on the hub or router except the uplink port.
3.
Attach the power cord, then plug in the printer and turn it on. For safety information, see
4.
Set or automatically discover the network IP address of the printer. For details, see