Xerox C118 소프트웨어 가이드

Halftone - Specifies the halftone settings for printing.
Select [Fine Dots] for the small size halftone dot commonly used in PostScript.
Select [Thick Dots] for coarser dots than the Fine Dots setting.
Select [Type 3] for the same halftone setting that is used in PCL.
Image Enhancement - Specifies whether or not to use the Image Enhancement 
function. Selecting [On] smooths out boundaries when printing. This reduces jagged 
edges by artificially increasing the resolution of the image. When printing a bitmapped 
image  composed of coarse halftone dots, smooth color gradation is impossible in 
certain situations. In this case, select [Off].
Draft Mode - Specifies whether or not to reduce the amount of toner used when 
printing drafts. When [On] is selected, the overall printed color becomes lighter. This is 
best for printing documents when high print quality is not necessary.
Custom Paper Auto Orientation - Specifies whether or not to correct the orientation 
of the custom paper.
Substitute Tray - Specifies what action to take when the paper for the print size is not 
loaded in the machine.

Use Printer Settings - Use the printer settings. The settings can be confirmed on 
the control panel.
Display Message - Display paper supply messages on the control panel. Printing 
is impossible until paper is supplied.
Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically 
adjusts the image size as necessary.
Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same 
size as the image.
Use Larger Size (Adjust to Fit) - Selects paper larger than the original and 
automatically adjusts the image size as necessary.
Use Larger Size (No Zoom) - Selects paper larger than the original and prints the 
same size as the image.