Xerox 35 참조 가이드
Page 11-10
Quick Reference Guide
Jobs scan but do not print
¾
Some jobs require image processing before printing. This may take as long as 2
seconds per page.
seconds per page.
¾
Check the Job Status queue to determine if a job is processing. There may be a
job in the queue with a status of paused. Delete this job if it remains in the state
over 3 minutes.
job in the queue with a status of paused. Delete this job if it remains in the state
over 3 minutes.
¾
This may possibly be a result of an incorrect feature combination. The software
may need to be reset. Contact your System Administrator.
may need to be reset. Contact your System Administrator.
Output does not reflect the selections made on the
Touch Screen
Touch Screen
¾
Press Clear All between jobs.
¾
If a Save button displays on the touch screen, ensure Save is selected after
each selection.
each selection.
Fault Messages will not clear
¾
There may be occasions when a fault is cleared but the message will not clear.
Reboot your machine by powering OFF and ON using the ON/OFF switch at the
side of the machine.
Reboot your machine by powering OFF and ON using the ON/OFF switch at the
side of the machine.
CAUTION: Wait approximately 20 seconds before turning the machine back
ON. Any incomplete jobs in the queue will be lost.
ON. Any incomplete jobs in the queue will be lost.
CAUTION: Use only the ON/OFF switch to reboot your machine. Damage may
occur to your machine if power is removed by other means.
occur to your machine if power is removed by other means.