Xerox N3225 사용자 설명서
Paper Jams
Chapter 5: Troubleshooting
❖
5-7
Table 5.1
Paper Jam Messages
Message
Description/Corrective Action
Check
Staple Cartridge
The Stapler cartridge is not in position. Verify that the Stapler cartridge has
been installed. and that it contains staples.
been installed. and that it contains staples.
Clear Area A
Clear Env/Bypass
A paper jam has occurred in Area A. Clear the Envelope Feeder or the Bypass
Feeder. Then reset Tray 1.
Feeder. Then reset Tray 1.
Clear Area A
Reset Tray 1
A paper jam has occurred in Area A. Use one of the following procedures to
clear Area A:
clear Area A:
Then reset Tray 1.
Clear Area B
Reset Tray 2
A paper jam has occurred in Area B. Clear Area B (page 5-18). Then reset
Tray 2.
Tray 2.
Clear Area C
Reset Tray 4
A paper jam has occurred in Area C. Clear Area C (page 5-18). Then reset
Tray 4.
Tray 4.
Clear Area A,B
Reset Tray 2
A paper jam has occurred in Areas A and B. Use one of the following
procedures to clear Area A:
procedures to clear Area A:
Then clear Area B (page 5-18) and reset Tray 2.
Clear Area C
Reset Tray 5
A paper jam has occurred in Area C. Clear Area C (page 5-18). Then reset
Tray 5.
Tray 5.
Table 5.1 Page 1 of 7