Xerox 2135 사용자 가이드
Advanced Features and Troubleshooting Manual
123
Networking
5.
In the left window of the Chooser, click on the Adobe PS icon to select it. You may
have to use the scroll bars at the right side of this box to locate the icon.
Note
Your network may be divided into AppleTalk Zones. You can tell if there are
zones by the appearance of the CHOOSER window. When the CHOOSER
program detects multiple zones, the left window is reduced in size. The lower
half of the CHOOSER window is a zone list. Identify, then select the zone in
half of the CHOOSER window is a zone list. Identify, then select the zone in
which the Phaser 2135 printer is located.
6.
When you select a zone, printer names appear in a box to the right.
7.
Select the EtherTalk Name from the window to the right.
8.
Click Setup.
Note
If you do not use the Phaser 2135 printer driver, you may not be able to take
advantage of all of the printer’s features. Before continuing, make sure that the
software included with your customer documentation set has been loaded into
software included with your customer documentation set has been loaded into
each Macintosh computer that is sending jobs to the Phaser 2135 printer.
For First Time Installations
9.
Highlight the PPD for your Phaser 2135 printer. Click Select.
10.
Configure your driver with the options installed on your printer.
11.
Go to Step 16.
For Reconfiguration of Existing Printers
12.
Click on Select PPD. The window displays a list of PostScript printer description
files.
files.
13.
Highlight the PPD file for the desired printer.
14.
Click Select.
15.
Select Configure and set your driver with the options installed on your printer.
16.
Click OK when finished.
17.
Close the window to exit the Chooser.