Xerox 4510 부록 매뉴얼

The Print Density setting controls the darkness of your prints. The Print Density range is 0 to 
15, with 15 printing the darkest. The default value is 8.

To specify the Print Density setting, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

To specify the Print Density setting on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Press the 

 or 

 button to select the desired value, and then press the 

OK button.

To specify the Print Density setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the General folder on the left navigation panel, and then select Printer Defaults.

Change the setting in the Print Density field.

Click the Save Changes button at the bottom of the page.

The Print Quantity setting controls the number of copies the printer prints for each print job.

To specify the Print Quantity setting, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

To specify the Print Quantity setting on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Press the 

 or 

 button to set the value from 1 to 999, and then press 

the OK button.