Gestetner 1045 사용자 가이드

다운로드
페이지 59
41
4. NetWare Configuration
This chapter describes how to configure the machine to use as a print server or
a remote printer in a NetWare environment.
Note
❒ NetWare must be set to active using the machine's control panel. For more in-
formation about how to set it, see the System Settings.
Installing the NIB Setup Tool 
A utility called the NIB Setup Tool is provided to configure the machine to work
in a network environment. This section describes how to install the SmartNet-
Monitor for Admin, and how to run the NIB Setup Tool.
Limitation
❒ The NIB Setup Tool is supported to work with the following operating sys-
tems.
• Microsoft Windows 95/98/Me
• Microsoft Windows 2000
• Microsoft Windows NT 4.0
Installing SmartNetMonitor for Admin 
Follow these steps to install the SmartNetMonitor for Admin.
Preparation
You should install the SmartNetMonitor for Admin on the computer. If you
install the SmartNetMonitor for Admin from a file server or run it via the net-
work, the SmartNetMonitor for Admin might not work correctly.
Make sure to close all applications before starting the installation procedure.
A
Close all the applications that are currently running.
B
Insert the CD-ROM labeled “Printer Drivers and Utilities” into the CD-
ROM drive.
If the installer starts automatically, follow the instructions on the screen.
If not, go to step 
C
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
D
On the [Install/Uninstall] tab, click [Install].
E
Click [Next >].