Gestetner c7528 작동 가이드

Monitoring and Configuring the Printer

244

key [ key value ] val [1|2|3|4]

You can specify the WEP key when entering 
in hexadecimal.

With a 64-bit WEP, you can use 10 digit 
hexadecimals. With a 128-bit WEP, you can 
use 26 digit hexadecimals.

Up to four WEP keys can be registered. 
Specify the number to be registered with 
“val”.

When a WEP is specified by key, the WEP 
specified by key phrase is overwritten.

To use this function, set the same key num-
ber and WEP key for all ports that transmit 
data to each other.

You can omit the numbers with “val”. The key 
number is set to 1 when making these omis-
sions.

keyphrase [ phrase ] val [1|2|3|4]

You can specify the WEP key when entering 
in ASCII.

With a 64-bit WEP, you can use 10 digit 
hexadecimals. With a 128-bit WEP, you can 
use 26 digit hexadecimals.

Up to four WEP keys can be registered. 
Specify the number to be registered with 
“val”.

When a WEP is specified by key phrase, the 
WEP specified by key is overwritten.

To use this function, set the same key num-
ber and WEP key for all ports that transmit 
data to each other.

You can omit the numbers with “val”. The key 
number is set to 1 when making these omis-
sions.

encval [1|2|3|4]

You can specify which of the four WEP keys 
is used for packet encoding. “1” is set if a 
number is not specified.

auth [open|shared]

You can set an authorization mode when us-
ing WEP. The specified value and authorized 
mode are as follows:

open: open system authorized (default)

shared: shared key authorized rate

Parameter

Value configured