Gestetner 5490 작동 가이드
User Tools
144
4
2. Set Operat'n Mode
7
Data Print
Use to print out the following data.
Note
❒ Available settings:
• Log Data (Number of prints made, how many times paper
misfeeds occur and so on.)
• Reset Counters (Number of prints and master made under
each user code.)
• Store Class (Registered number of students in each class.)
8
Energy Saving
You can set the time until the Energy Saver mode starts.
Note
❒ Default: 3 Min. (minutes)
No.
Mode
Description
1
Min. Quantity
The minimum print quantity can be set between 0 and 9999.
Example: If you specify 20 as the minimum number of prints, runs
of 20 or more prints will be accepted, print runs of less than 20
prints will not be accepted.
of 20 or more prints will be accepted, print runs of less than 20
prints will not be accepted.
Note
❒ Default: 0
2
Max. Quantity
The maximum print quantity can be set between 0 and 9999.
Note
❒ Default: 9999
3
CopyCount Dis-
play
play
The counter can be set to show the number of prints made (Up),
or the number of prints left to be made (Down).
or the number of prints left to be made (Down).
Note
❒ Default: Down
5
Panel Beeper
Turns the beeper on or off.
Note
❒ Default: STD. (standard)
❒ Available settings:
❒ Available settings:
• ALL OFF (The beeper does not sound when you press keys
or when warning messages appear on the panel display.)
• STD. (When you press a key, the beeper does not sound.
When warning messages appear on the panel display, the
beeper sounds.)
beeper sounds.)
• ALL ON (The beeper sounds when you press a key or
when warning messages appear on the panel display.)
6
LCD Contrast
You can adjust the brightness of the panel display.
No.
Mode
Description