Gestetner ao70 작동 가이드

Setting Originals

31

❒ Place the original after correction

fluid and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.

❒ Dust and residue from originals

drawn with a pencil can mark the
exposure glass and cause marks to
be copied. We recommend using
the carrier sheet for this type of
original.

❒ If the rear edge of the original is

badly curled, smooth out the curl
with both hands before scanning
the original. If the original is insert-
ed as it is, it may be damaged.

❒ When copying curled originals,

use the copy output (front) auxilia-
ry tray.

❒ Do not use force to push the side

fence of the original guides.

For details about precautions with
originals, see p.13 “Originals”

A

❒ Make sure that the original

guides are not too tight.

B

❒ Do not release your hands until

that the original is pulled into
the machine.

❒ Once the originals start to feed

into the machine, do not push or
pull them. This may damage
your originals,

❒ If the originals are fed at a slant

or become jammed, press the

{Scanner Stop} key.

❒ Do not operate the document

roller while originals are being
fed through the machine. This
may damage your originals,

ZEDH190E

ZEDH180E

ZEDH150E

DolphinGB-Copy-F_V4_FM.book  Page 31  Monday, June 11, 2001  5:02 PM