Gestetner cs331 서비스 매뉴얼
5-21
1
2
3
4
5
6
7
9
10
11
12
8
Select other copy modes as required.
9
Press the START key.
7
Select the repeat number.
- To change the repeat number:
Press the 2 or 8 key to select the desired repeat
number, and press the SET key.
number, and press the SET key.
- If the repeat number is not set, the copier automatically
repeats the original once. Only the height direction is
available for repeat copying, and the original can be repeated
up to 8 times.
available for repeat copying, and the original can be repeated
up to 8 times.
- If the settings of the original and copy sizes are not made
appropriately, the repeated image may not be copied
completely.
completely.
8
Place the original(s) on the glass face down and
with its bottom toward you and with its top left
aligned against the original scale on the left side.
Page 2-9
6
Press the lower SET key.
5
Enter the distance values read for the area to be
repeated.
- Key in the value for X1 with the digital keys and press the
upper SET key.
- Similarly, set t he values for X2, Y1 and Y2.