Gestetner dsc224 사용자 가이드
Monitoring and Configuring the Printer
93
7
Monitoring and Configuring the Printer
Changing Names and Comments
You can change printer names and make a comment on printers to easily iden-
tify the printers listed on SmartNetMonitor for Client.
The following utilities are used to change printer names and comments.
tify the printers listed on SmartNetMonitor for Client.
The following utilities are used to change printer names and comments.
❖
❖
❖
❖ SmartNetMonitor for Admin
Allows you to change names and comments when the TCP/IP protocol or
IPX/SPX protocol is available. You can install SmartNetMonitor for Admin
from the CD-ROM that comes with the printer. For more information about
installing SmartNetMonitor for Admin, see p.60 “Installing SmartNetMoni-
tor for Admin”.
IPX/SPX protocol is available. You can install SmartNetMonitor for Admin
from the CD-ROM that comes with the printer. For more information about
installing SmartNetMonitor for Admin, see p.60 “Installing SmartNetMoni-
tor for Admin”.
❖
❖
❖
❖ Web Browser
Allows you to change names and comments when the TCP/IP protocol is
available.
available.
Note
❒ Each of the names, in a TCP/IP protocol form (printer name) and in a Net-
BEUI protocol form, is changed individually. Comments are, however,
common to both of them.
common to both of them.
❒ The factory default name consists of “RNP” and the last 3 bytes of the
MAC address on the Network Interface Board. For example, when the
MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. Comments are not configured.
MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. Comments are not configured.
SmartNetMonitor for Admin
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the [Group] menu, point to [Search Device], and select [TCP/IP] or
[IPX/SPX]
[IPX/SPX]
.
A list of printers appears.
Note
❒ Select the protocol of the printer you want to change its configuration.
CCCC
On the list, Select a printer whose Network Interface Board you want to
change its configuration.
change its configuration.
DDDD
From the [Tools] menu, select [NIB Setup Tool].
The NIB Setup Tool starts up.
The NIB Setup Tool starts up.