Gestetner dsc535 작동 가이드

System Settings

62

This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
[Parallel Interface]

 is displayed when this machine is installed with the IEEE 1284

interface board.

❖ Parallel Timing

Sets the timing for the control signal of the parallel interface.
• ACK outside
• ACK  inside
• STB  down

❖ Parallel Communication Speed

Sets the communication speed for the parallel interface.
• High Speed
• Standard

❖ Selection Signal Status

Sets the level for the select signal of the parallel interface.
• HIGH
• LOW

❖ Input Prime

Sets whether to validate or invalidate the input prime signal upon reception.
• Active
• Inactive

❖ Bidirectional Communication

Sets the printer's response mode to a status acquisition request when using a
parallel interface.
• On
• Off
When set to [Off], bidirectional communication function will be disabled, and
the printer driver will not be installed under Windows Auto Detect function.

❖ Signal Control

Specify how error during printing or sending facsimile from the computer is
to be dealt with.
• Job Acceptance Priority
• Printer  Priority