Gestetner f104 작동 가이드
Reception Functions
77
4
Note
❒ You can select whether the ma-
chine accepts Remote Transfers or
not with the User Parameters. See
p.146 “User Parameters” (switch
11, bit 0).
not with the User Parameters. See
p.146 “User Parameters” (switch
11, bit 0).
How to make a Remote Transfer Request
(push signal)
(push signal)
This procedure describes how to make
a Transfer Request to this machine
from the Requesting Party's machine.
Require the Requesting Party to per-
form the following procedure.
a Transfer Request to this machine
from the Requesting Party's machine.
Require the Requesting Party to per-
form the following procedure.
Note
❒ To cancel the operation in
progress, press the
{{{{q
q
q
q}}}} key twice.
AAAA
Place your original, and then se-
lect any scan settings you require.
lect any scan settings you require.
BBBB
Dial using On Hook Dial, or lift
the handset or external telephone
and dial.
the handset or external telephone
and dial.
CCCC
When the connected line is a dial
line, the machine switches over so
it can send a push signal.
line, the machine switches over so
it can send a push signal.
DDDD
When you hear the reception
tone, press the
tone, press the
{{{{q
q
q
q}}}} key.
When the Remote Transfer is ac-
cepted, you will hear a confirma-
tion "peeee" tone.
cepted, you will hear a confirma-
tion "peeee" tone.
Note
❒ If Remote Transfer is turned off
on the machine at the other end,
you will not hear a confirmation
tone and the tone mentioned in
step
you will not hear a confirmation
tone and the tone mentioned in
step
D will continue.
❒ If the Transfer Request is not ac-
cepted, for example if memory
is full or the Remote ID has been
wrongly entered five times, you
will hear five "pee-po" tones
and the line will be cut off.
is full or the Remote ID has been
wrongly entered five times, you
will hear five "pee-po" tones
and the line will be cut off.
EEEE
Enter the 4-digit Remote ID
stored in the Transfer Station,
and then press the
stored in the Transfer Station,
and then press the
{{{{q
q
q
q}}}} key.
When you enter the correct ID, you
will hear a "peeee" tone.
will hear a "peeee" tone.
Note
❒ If you do not carry out each step
from
E to J within 30 seconds,
the line will be cut off.
❒ Enter the next tone within five
seconds. If you wait too long,
you will hear a "pee pee pee"
tone and you must start the
whole procedure again.
you will hear a "pee pee pee"
tone and you must start the
whole procedure again.
❒ If you enter the wrong Remote
ID five times, the line will be au-
tomatically cut off, and if you
do not change this machine's
Remote ID, Remote Transfer
will not be accepted. The five
times includes previous non-
valid attempts.
tomatically cut off, and if you
do not change this machine's
Remote ID, Remote Transfer
will not be accepted. The five
times includes previous non-
valid attempts.
❒ If you enter the wrong ID, you
will hear a "pee pee pee" tone. If
this happens, try again.
this happens, try again.
FFFF
Press
{{{{2}}}} {{{{4}}}} {{{{q
q
q
q}}}}.
GGGG
Press the
{{{{p
p
p
p}}}} key three times.
Specify the Transfer Result Re-
port return address stored in the
Transfer Station using the proce-
dure below, and then press the
port return address stored in the
Transfer Station using the proce-
dure below, and then press the
{{{{q
q
q
q}}}} key.
If the return address is correct, you
will hear a "peeee" tone.
will hear a "peeee" tone.
When the return address is
stored in a Quick Dial
stored in a Quick Dial
A Enter the number (01-90) of the
Quick Dial key.
StellaF2_EN_Combine_F_FM.book Page 77 Friday, February 14, 2003 5:16 PM