Preh mci touchkey 사용자 가이드

 

 

 

PrehKeyTec GmbH 

MCI_TouchKey_Manual_V14.doc - 2008-08-06 

Page  4/10 

Before using your MCI TouchKey, please check whether all the parts shown below are present and show no obvious signs of damage:  

- 

Operating Instructions and Technical Data 

- MCI 

TouchKey 

 

 

 

 

 

 

 

 

 

 

2.2.1 System requirements 

The MCI TouchKey was developed for computers with USB interface. The following requirements must be on the system for the TouchKey 
to function: 

• 

Windows XP or Vista 

• 

.NET Framework 2.0 or higher 

• 

USB Interface with 500 mA current supply and voltage of +5V ± 5% 

• 

Support for Linux OS is still under development 

2.2.2  USB cable installation 

 

Procedure 

 

 

 

 

Please connect the USB Plug of the TouchKey to a free USB port on your computer. The computer automatically recognizes the MCI 
TouchKey device. No special drivers are required. 

 

2.2.3 Cable routing 

 

On delivery, the connection cable is routed on the right side of the device (seen from above). Follow the 
described procedure below to move the cable to the left or center: 

Lay the keyboard with the keypad facing down on a soft surface. To move the cable outlet to the left, 
move the connection cable as shown in 

. Ensure that the keyboard cable is firmly pressed into the 

nips provided 

 

 

2.2.4 Functional check 

After starting the computer, all four LEDs on the TouchKey light up briefly. Depending on the status of Num Lock, Caps Lock or Scroll Lock, 
the associated LEDs will light up. Your MCI TouchKey is now ready for use. 

Fig. 1  Contents of package, figure shows a specific keyboard layout 

Fig. 2 USB 

plug 

Nips 

Fig. 6 cable 

nips