ONKYO ht-s3200 사용자 가이드

16

Read the following before connecting your speakers:
• You can connect speakers with an impedance of 

6 ohms or higher. If you use speakers with a lower 
impedance, and use the amplifier at high volume 
levels for a long period of time, the built-in protection 
circuit may be activated.

• Disconnect the power cord from the wall outlet before 

making any connections.

• Read the instructions supplied with your speakers.
• Pay close attention to speaker wiring polarity. Connect 

positive (+) terminals to only positive (+) terminals, 
and negative (–) terminals to only negative (–) 
terminals. If you get them the wrong way around, the 
sound will be out of phase and will sound unnatural.

• Unnecessarily long or very thin speaker cables may 

affect the sound quality and should be avoided.

• Be careful not to short the positive and negative wires. 

Doing so may damage the AV receiver.

• Don’t connect more than one cable to each speaker 

terminal. Doing so may damage the AV receiver.

• Don’t connect a speaker to several terminals.

For North American model
• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center 

hole of the speaker terminal.

The AV receiver’s positive (+) speaker terminals are 
color-coded for ease of identification. (The negative (–) 
speaker terminals are all black.)

Front left

White

Front right

Red

Center

Green

Surround left

Blue

Surround right

Gray

Subwoofer Purple