ONKYO ht-sr750 사용자 가이드

 

48

 

The following table shows which listening modes can be used with each input signal format.

The AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high 
fidelity and stunning surround sound.

 

The selected input source is output directly with minimal 
processing for a pure sound.

 

The selected input source is processed as a stereo signal 
and output by the front left and right speakers and the 
subwoofer. 

 

Use this mode when watching an old movie with a mono 
soundtrack, or to select multilingual soundtracks 
recorded in the left and right channels of some movies. 
It can also be used when playing a DVD or other source 
with multiplexed audio, such as a karaoke DVD.

 

*1. In the Direct listening mode, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In listening modes 

other than Direct, and Stereo, 64 kHz, 88.2 kHz, and 96 kHz PCM is processed at 32 kHz, 44.1 kHz, and 48 kHz respectively.

 

*2. In listening modes other than Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.

 

✔

✔

✔

✔

✔

✔

✔

✔

✔

 

✔

✔

✔

✔

✔

✔

✔

✔

 

✔

 

✔

✔

✔

 

✔

 

*3

 

*3. Not available for 88.2 kHz and 96 kHz PCM input signals.

 

✔

✔

 

✔

✔

 

✔

✔

✔

✔

✔

✔

✔

✔

 

*4. Available only when surround speakers are connected.

 

✔

✔

✔

✔

✔

✔

✔

✔

Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 42.

The illustration shows which speakers are active in 
each listening mode with 5.1 channel speaker sys-
tem.

Front left

Center

Front right

Subwoofer

Surround right

Surround left

HT-SR750_En.book Page 48 Thursday, August 2, 2007 10:05 AM