ONKYO TX-SA806 사용자 가이드

40

For non-North American models: To completely shut down the AV receiver/AV amplifier, set the [POWER] switch 
to the OFF position (

(Skip this step if you have the North American model.) 
The AV receiver/AV amplifier enters Standby mode, and the STANDBY indicator 
comes on.

Press the [ON/STANDBY] button. 
Alternatively, press the remote controller’s [RECEIVER] button, followed 
by the [ON/STANDBY] button.
The AV receiver/AV amplifier comes on, the display lights up, and the STANDBY 
indicator goes off.

To turn the AV receiver/AV amplifier off, press the [ON/STANDBY] button, or press 
the remote controller’s [ON/STANDBY] button. The AV receiver/AV amplifier will 
enter Standby mode. To prevent any loud surprises when you turn on the AV 
receiver/AV amplifier, always turn down the volume before you turn it off.

To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver/AV amplifier before you 
use it for the very first time. These settings only need to be made once.

■ Do the automatic speaker setup—this is essential!

See “Automatic Speaker Setup (Audyssey MultEQ

®

■ Did you connect your TV to the HDMI OUT or COMPONENT 

VIDEO MONITOR OUT?
If you did, see “Monitor Setup” on page 41.

■ Have you connected a component to an HDMI input, 

If you have, see “HDMI Input Setup” on page 44, “Component Video 
Setup” on page 45, or “Digital Input Setup” on page 46 respectively.

■ Have you connected an Onkyo MD recorder, CD recorder, 

or RI Dock?
If you have, see “Changing the Input Display” on page 50.

CD recorder, MD recorder, 

RI Dock

TX-SR806_En.book  Page 40  Monday, August 4, 2008  10:25 AM