GE 25865 사용자 가이드

11

To avoid power outage, you can install four AA alkaline batteries (not included in sales) 

into the base as the backup.
1.  Remove the battery compartment cover (located on the bottom of the base).
.  Follow the battery installation display and insert four AA alkaline batteries inside the 

compartment.

3.  Put the battery compartment cover back into place.

1.  Choose an area near an electrical outlet and a telephone wall jack (either two RJ11 

or one RJ14 type), and place  your cordless telephone on a level surface, such as a 

desktop or tabletop, or you may mount it on the wall.

.   Plug the AC power converter into the electrical outlet and the DC connector into the 

jack on the back of the base. 

3.  Plug one end of a telephone line cord into the TEL LINE 1 jack on the back of the base 

and the other end into the modular wall jack for Line 1. Plug the other telephone line 

cord into the TEL LINE  jack on the back of the base and the other end into modular 

wall jack for Line .

4.   Place the handset in the base cradle. The charge/in use indicator turns on, verifying the 

battery is charging.  

HANDSET 1 shows in the handset’s display after approximately  

minutes.

5.  Allow the phone to 

charge for 16 hours prior to first use. If you don’t properly charge 

the phone, battery performance is compromised. 

1.  Turn the base over. 
.  Slide the pedestal into the slots on the bottom of the base, and then push the pedestal 

down until it snaps into place.

3.  Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the 

unit into place. (Wall plate not included.)