Sapido gr-1222 사용자 가이드
http://www.sapido.com.tw
204
User’s Manual V1.0
5.
SSID
Service Set identifier, the default SSID is SAPIDO_Fun_Center, users can
define to any.
define to any.
6.
Channel Width
Please select the channel width, it has 2 options: 20MHZ, and 40MHZ.
7.
Control Sideband
Enable this function will control your router use lower or upper channel.
8.
Channel Number
Please select the channel; it has Auto, 1, 2~11 options.
9.
Broadcast SSID
User may choose to enable Broadcast SSID or not.
10. Data Rate
Please select the data transmission rate.
11. Associated Clients
Check the AP connectors and the Wireless connecting status.
12. Enable Mac Clone (Single Ethernet Client)
Clone the MAC address for ISP to identify.
13. Enable Universal Repeater Mode (Acting as AP and Client
simultaneously)
Allow to equip with the wireless way conjunction upper level, provide the
bottom layer user link in wireless and wired way in the meantime. (The IP that
bottom layer obtains is from upper level.)
Allow to equip with the wireless way conjunction upper level, provide the
bottom layer user link in wireless and wired way in the meantime. (The IP that
bottom layer obtains is from upper level.)
Ex: When users enable the Universal Repeater to connect to the upper
level device, please input the channel and SSID of the upper level
device on router’s GUI. Click on Apply Changes to save the settings.
(The DHCP in IP config needs to be disabled.)
level device, please input the channel and SSID of the upper level
device on router’s GUI. Click on Apply Changes to save the settings.
(The DHCP in IP config needs to be disabled.)
-----------------------------------------------------------------------------------