Fujifilm F480 사용자 가이드
92
Installation on a Windows PC
Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
Models with one of the above operating systems pre-installed.
*
2
When you install the software, login using a system administrator account (e.g. “Administrator”).
CAUTION
• Note that the software to be installed is different depending on the OS. (Windows 98SE/Me: FinePixViewer, Windows 2000/XP/
Vista: FinePixViewer S)
• Additional USB interface board is not guaranteed.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
Requirement
Recommendation
Operating
System
System
*
1
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
*
2
Windows XP Home Edition
*
2
Windows XP Professional
*
2
Windows Vista
*
2
Windows XP
Windows Vista
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
2 GHz Pentium 4 or
better
better
3 GHz Pentium 4 or
better
better
RAM
128 MB minimum (512 MB minimum for Windows Vista)
512 MB or better
1 GB or better
Hard disk
space
space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
Amount required for operation: 600 MB minimum
2 GB or better
15 GB or better
Display
800 × 600 pixels or better, 16-bit color or better
1024 × 768 pixels or better, Highest (32 bit)
92