Moog stage ii 사용자 가이드
Page 44
LP Stage II User’s Manual - The User Interface
Page 45
LP Stage II User’s Manual - The User Interface
D. System Utilities Menus
System Utilities provide a set of useful system commands, including
commands to calibrate, restore factory defaults and set global system
options. There are seven pages of System Utilities menus, beginning
with the Version number display.
commands to calibrate, restore factory defaults and set global system
options. There are seven pages of System Utilities menus, beginning
with the Version number display.
The second page of the System Utilities menu displays the Headphone
Volume (HP VOL) menu , which allows you to scale the headphone
volume in relation to the output volume. This can be adjusted from
0 (off) to 255 (max). To change the scale value, use the CURSOR to
move to the scale parameter field then use the VALUE knob to select
the desired value.
Volume (HP VOL) menu , which allows you to scale the headphone
volume in relation to the output volume. This can be adjusted from
0 (off) to 255 (max). To change the scale value, use the CURSOR to
move to the scale parameter field then use the VALUE knob to select
the desired value.
The third page of the System Utilities menu allows you to enable or
disable menu wrapping. When menu wrapping is enabled (‘ON’),
menus will wrap back to the beginning when you reach the end. When
disabled (‘OFF’), menus will not wrap. To enable/disable menu wrap-
ping, use the CURSOR to move to the ON/OFF parameter field, then
use the VALUE knob to select the desired value. The default is ‘ON’.
disable menu wrapping. When menu wrapping is enabled (‘ON’),
menus will wrap back to the beginning when you reach the end. When
disabled (‘OFF’), menus will not wrap. To enable/disable menu wrap-
ping, use the CURSOR to move to the ON/OFF parameter field, then
use the VALUE knob to select the desired value. The default is ‘ON’.
The fourth page of the System Utilities menu allows you to perform a
Master Reboot of the LP, which is similar to turning the power OFF and
ON. To perform this action, press ENTER.
Master Reboot of the LP, which is similar to turning the power OFF and
ON. To perform this action, press ENTER.
The fifth page of the Systems Utilities menu allows you to restore the
global default values, performance sets and all factory presets. When
you are ready to execute this operation, press ENTER to activate.
global default values, performance sets and all factory presets. When
you are ready to execute this operation, press ENTER to activate.
You will be asked to confirm this operation (Yes/No). If you
are unsure, select NO and press ENTER to return to the Sys-
tem Utilities menu without any action. If you are sure, use the
VALUE knob to change from NO to YES and press ENTER.
This will restore the factory default global values, performance
presets and factory presets.
are unsure, select NO and press ENTER to return to the Sys-
tem Utilities menu without any action. If you are sure, use the
VALUE knob to change from NO to YES and press ENTER.
This will restore the factory default global values, performance
presets and factory presets.
Note: You should back up any presets you
wish to save prior to performing this action.
wish to save prior to performing this action.
You will be asked to confirm this operation (Yes/No). If you
are unsure, select NO and press ENTER to return to the Sys-
tem Utilities menu without any action. If you are sure, use the
VALUE knob to select YES and press ENTER. This will reboot
the LP.
are unsure, select NO and press ENTER to return to the Sys-
tem Utilities menu without any action. If you are sure, use the
VALUE knob to select YES and press ENTER. This will reboot
the LP.