Samsung ppm42h3 사용자 가이드
ENG
9
You must insert or replace the batteries in the remote control when
you:
you:
◆ Purchase the PDP
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
the symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
care to respect the polarities:
◆
- on the battery against - on the remote control
◆
+ on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
control and pressing it back into place.
Inserting the Batteries in the Remote Control
Assembling the Stand-Base
Fit the Stand-Base into the guide hole on the bottom of
the monitor and tighten the left and right sides using
four screws for each side.
the monitor and tighten the left and right sides using
four screws for each side.
➢
Two or more people should carry the PDP.
Never lay the PDP on the floor because of possible
damage to the screen. Always store the PDP
upright.
Never lay the PDP on the floor because of possible
damage to the screen. Always store the PDP
upright.
0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 9