Samsung dvd-m108 사용자 가이드

35

Before requesting service (troubleshooting), please check the following.

No operations can be
performed with remote.

The screen ratio cannot be
changed.

No audio.

Play mode differs from the
Setup Menu selection.

Disc Menu doesn’t appear.

The      icon appears on
screen.

Forgot password

If you experience other
problems.

5.1 channel sound is not
being reproduced. 

Disc does not play.

•  Check the batteries in the remote. May need replacing.
•  Operate the remote control at a distance of no more than 20 feet.
•  Remove batteries and hold down one or more buttons for several min-

utes to drain the microprocessor inside the remote to reset it. Reinstall
batteries and try remote again.

•  Ensure that the disc is installed with the label side facing up.
•  Check the region number of the DVD.

•  5.1 channel sound is reproduced only when the following conditions

are met. : 

1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.

•  Check whether the disc being played has the “Dolby 5.1 ch” mark on

the outside.

•  Check if your audio system is connected and working properly.
•  In a SETUP Menu, is the Audio Output set to Bitstream?

•  The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is

out of range.

•  Check if the disc has a Menu.

•  Some of the functions selected in the Setup Menu may not work prop-

erly if the disc is not encoded with the corresponding function.

•  The Screen Ratio is fixed on your DVDs.

•  Make sure you have selected the correct Digital Output in the Audio 

Options Menu.

•  Press power on from a cold start with no disc in the unit. Press the STOP

and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.

•  Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and follow
the procedure once again.

•  If the problem still cannot be solved, please contact your nearest

authorized service center.

P4

P7

P12

P15

P29~30

P32~33

P33

P33

P32

34

1  TV Aspect

4:3   L-Box

2  Still Mode

Auto

3  Screen Massages

On

4  Front Display

Auto Dim

5  Black Level

Off

6  Quasi-PAL

On

7  SCART Output

RGB

1 

1 

With the unit in Stop mode, press the SETUP button.

2 

2 

Use the UP/DOWN buttons to select DISPLAY OPTIONS. 

Then press the ENTER button.

3 

3 

Use the UP/DOWN buttons to select the desired item. 

Then press the LEFT/RIGHT buttons.

TV Aspect 
Depending on the type of television you have, you may want to adjust 
the screen setting (aspect ratio).

. 4:3 Letter Box :

Select when you want to see the total 16:9 ratio screen DVD 
supplies, even though you have a TV with a 4:3 ratio screen. 
Black bars will appear at the top and bottom of the screen.

. 4:3 Pan-Scan :

Select this for conventional size TVs when you want to see the 
central portion of the 16:9 screen. (Extreme left and right side of   
movie picture will be cut off.)

. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV.

Still Mode 
These options will help prevent picture shake in still mode and display 
small text clearer.

. Field : Select this feature when the screen shakes in the Auto mode.

. Frame : Select this feature when you want to see small letters more clearly 

in the Auto mode.

. Auto : When selecting Auto, Field/Frame mode will be automatically converted.

Screen Messages 
Use to turn on-screen messages On or Off.

Front Display
Adjust the brightness of the unit’s front panel display.
1

. Bright : Makes the Front Panel Display bright.

. Dim : Makes the Front Panel Display dim.

. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.

Black Level
Adjusts the brightness of the screen.(On/Off)

Quasi-PAL 
Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode.

• How to make the SETUP MENU disappear or return to menu screen during set up;

Press RETURN button.

M108(Asia)  4/17/01 1:15 PM  Page 34