Samsung dvd-p728 작동 가이드

36

37

Language

Display

1

1

Press the SETUP button in play or stop mode.

2 

2 

Press the UP/DOWN buttons to select Audio.

Then press the ENTER button.

3 

3 

Use the UP/DOWN buttons to select Speaker.

Then press the ENTER button.

4 

4 

Use the UP/DOWN or LEFT/RIGHT buttons to

select the desired item. Then press the ENTER button.

Setting up SPEAKER MODE
• If you have connected the system to a speaker with low frequencies of 100Hz or below, 

select ‘Found (Large illustration)’.

• If you have connected the system to a speaker without low frequencies of 100Hz or 

below, select ‘Found(Small illustration)’. If you don’t connect a subwoofer, always select 
‘Found(Large illustration)’ for the Front Speakers(L/R).

• When you don’t have a particular speaker connected, select ‘Not found

(No illustration visible)’.

Setting up TEST
The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel
Balance to match to the volume of test 
signals memorized in the system.

FRONT(L)            CENTER            FRONT(R)            SUBWOOFER        
SURROUND(R)            SURROUND(L)

• How to make the SETUP MENU disappear or return to menu screen during set up.

Press RETURN button.

• The subwoofer test output signal is lower than the other speakers.
• The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.

1 

1 

With the unit in Stop mode, press the SETUP button.

2 

2 

Use the UP/DOWN buttons to select Display. Then

press the ENTER button.

3 

3 

Use the UP/DOWN buttons to select the desired item.

Then press the LEFT/RIGHT buttons.

Depending on the type of television you have, you may want to adjust

the screen setting (aspect ratio).

. Letter Box :

Select when you want to see the total 16:9 ratio screen DVD 

supplies, even though you have a TV with a 4:3 ratio screen. 

Black bars will appear at the top and bottom of the screen.

. Pan-Scan :

Select this for conventional size TVs when you want to see the 

central portion of the 16:9 screen. (Extreme left and right side of   

movie picture will be cut off.)

. Wide :

You can view the full 16:9 picture on your widescreen TV.

These options will help prevent picture shake in still mode and display

small text clearer.

. Auto : When selecting Auto, Field/Frame mode will be

automatically converted.

. Frame : Select this feature when you want to see small letters more

clearly in the Auto mode.

. Field : Select this feature when the screen shakes in the Auto

mode.

Use to turn on-screen messages On or Off.

Adjust the brightness of the unit’s front panel display.

. Auto Dim : Makes the Front Panel Display dim automatically when

playing a DVD.

. Dim : Makes the Front Panel Display dim.

. Bright : Makes the Front Panel Display bright. 

Adjusts the brightness of the screen.(On/Off)

You are unable to adjust picture brightness in case you select

progressive video out.

NTSC Disc Output 
“NTSC” if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave “PAL 60Hz” as is.

Language

Parental

Audio

4:3 L-Box

Still Mode

Auto

On

Auto Dim

Screen Messages

Front Display

Black Level

On

NTSC Disc Output

PAL 60 Hz

Return

Enter

• How to make the SETUP MENU disappear or return to menu screen during set up;

Press the RETURN button.

P728(gb)00049U/XSH -2  7/23/02 1:34 PM  Page 40