Samsung dvd-v940 지침 매뉴얼
ENG-14
Before recording or playing back a cassette, you can
select the required system standard.
select the required system standard.
➢
When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select
the User Set option.
3
Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
4
Press the corresponding
,
❷
buttons, until the
Colour System option is selected.
5
Press the OK or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W.
B/W
Black and White
6
On completion, press RETURN three time to exit
the menu.
the menu.
Selecting the Colour Mode
Colour System : Auto
User Set
IPC : On
G-Code Extend : Off
G-Code Extend : Off
Auto
PAL
MESECAM
B/W
PAL
MESECAM
B/W
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select
the Install option.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4
Press the
,
❷
buttons, until the VCR Output CH
option is selected.
5
Select the required output channel (CH28~CH69)
by pressing the OK or
by pressing the OK or
❿
buttons. and
➛
buttons.
CH28
.. CH38
.. CH69
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Then tune your television again (see page 9).
Setting the DVD-VCR Output
Channel
Channel
Auto Setup
Manual Setup
VCR Output CH : CH 38
VCR Output CH : CH 38
Install
CH:28
:
CH:38
:
CH:69
7
To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
8
Press the
,
❷
buttons to select required position.
And then press OK again to swap the position.
9
On completion, press the RETURN button four
times to exit the menu.
times to exit the menu.
Changing the Preset
Station Table
Station Table
00374R DVD-V940K/XSA-ENG 5/6/04 11:34 AM Page 14