Samsung sv-dvd540 지침 매뉴얼
Selecting the Audio Output Mode
36
37
GB
GB
This function allows you to play back any pre-recorded cassette.
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press
❿
ll.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto
Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
automatically to reduce disturbance (Digital Auto
Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
3
To...
Then press...
Stop the playback
■
(STOP).
Eject the cassette
(EJECT).
Playing a Cassette
EJECT
AUX
3
2
3
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (
manually by pressing the TRK (
or ) buttons until the picture is clear
and stable.
Result:
◆
The tracking bar appears.
◆
The image is adjusted.
◆
The tracking bar disappears when you release the button.
VCR
Playing a Cassette in Slow Motion
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are
available.
loudspeakers and AV outputs. The following options are
available.
Option
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and
normal channels.
normal channels.
MONO
Used to listen to the sound on the normal mono
channel.
channel.
L R
Used to listen to Hi-Fi stereo sound on the left and right
channels.
channels.
➢
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of
Mono.
sound switches to Hi-Fi after five seconds of
Mono.
To select the sound mode, simply press the AUDIO button on the
remote control until the required option is displayed.
remote control until the required option is displayed.
L
R
MIX
L R
MONO
You can play a cassette in slow motion.
➢
No sound is heard when playing back a cassette in
slow motion.
slow motion.
1
Press:
◆
❿
ll to start playing the cassette
◆
❿
ll button one more time to make still mode.
◆
❿❿
to start SLOW mode.
◆
❿❿
or
➛➛
button as many times as required to decrease or
increase the speed respectively
◆
To return to the normal speed, press the
❿
ll button twice.
2
When playing back in slow motion, picture interference may
occur.
Press the TRK (
occur.
Press the TRK (
or ) buttons to minimize this effect.
☛
When you have been using the Slow Motion function
for more than about two minutes, the DVD-VCR will
automatically play to protect the:
for more than about two minutes, the DVD-VCR will
automatically play to protect the:
◆
Cassette
◆
Video heads
2
2
1
1
VCR
VCR
VCR
00278A SV-DVD540/EUR-GB2 9/9/03 9:51 AM Page 36