Samsung rcd-s70 지침 매뉴얼
8
GB
GB
Power
Surround
Sleep
CD SYN
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Set
Mono/ST
Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
4
1
2
4
3
2
1
3
Select the required frequency band by pressing
TUNER/BAND on the front panel or Band on the
remote.
TUNER/BAND on the front panel or Band on the
remote.
The PROGRAM function can be used to assign a new station to an existing
program number.
program number.
4
If you do not want to store the radio station found, revert to Step 3 and search for another station.
Otherwise:
a Press Program/Set.
Result: The MEMORY is displayed for a few seconds.
b Press
or
to assign a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result: MEMORY is no longer displayed and the station is stored.
2
To search for a
Press Mode button
station...
Manually
One or more times until MANUAL is displayed.
Automatically
One or more times until AUTO is displayed.
5
To store any other radio frequencies required, repeat Steps 3 to 4.
You can store up to:
◆
15 FM stations
◆
8 MW stations
◆
7 LW stations
◆
15 AM stations
◆
15 FM stations
Select the station to be stored by:
Pressing
or
buttons to increase or decrease the frequency respectively.
To scroll through the frequencies faster when searching manually, hold down the
or buttons.
The automatic search procedure may stop on a frequency that does not correspond to a
radio station. If this happens, use the manual search mode.
radio station. If this happens, use the manual search mode.
Searching for and Storing the Radio Stations
PRESET function is explained in detail in the section “Selecting a Stored
Station” on.
Station” on.
(option)
(option)