Samsung ht-ds110 지침 매뉴얼

다운로드
페이지 66
Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
L: Front Speaker (L)
C: Center Speaker
SW: Subwoofer 
R: Front Speaker (R)
LS: Rear Speaker (L)
RS: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
44
SETUP
2
1
Press MENU button.
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press
ENTER button.
To end the test tone, 
press TEST TONE button.
Press TEST TONE button.
Test tone will be produced as follows:
When playing a DVD or CD, this will work 
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
When manually testing using the TEST TONE button
Multi-Channel Pro Logic Mode
Start
The test tone will be sent to L 
➝ 
➝ 
RS 
➝ 
LS 
➝ 
SW in that order. 
If the ENTER button is pressed again
at this time, the test tone will stop.
  33P~64P(DS110)-GB  9/16/04 9:31 AM  Page 45