Samsung ws-28m204 사용자 가이드
English - 46
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to MONO.
◆ If the stereo signal is weak and automatic switching
occurs, switch to MONO.
◆ When receiving mono sound in AV mode, connect to the
“AUDIO-L” input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
➢
DTV mode
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
MONO (Normal use)
MONO
↔ MONO
NICAM
(Normal)
STEREO
↔ MONO
NICAM
(Normal)
MONO (Normal use)
DUAL I
↔ DUAL II
STEREO
↔ MONO
(Forced mono)
Dual I
→ Dual II → MONO
NICAM
NICAM
(Normal)
NICAM
Stereo
A2
Stereo
→
→
Selecting the Sound Mode
Y
b
y
b
y
Mono
Stereo
Dual Mono
On-screen
indication
When press the
DUAL I-II button
After changing channels
(Default Mode)
Mono
Stereo
↔
Mono
Dual I
→
Dual II
Dual
Mono
Stereo
Dual I
Mono
Stereo
Dual I
→
AA68-03541A-X12Eng 2005/04/28 09:16 AM Page 46