Samsung ws-28m204 사용자 가이드

다운로드
페이지 62
English - 9
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the “ ” (On/Off) button on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER (
) button on the remote control to switch the
television on.
Result :
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
32 or “Storing Channels Manually” on page 34.
You can also switch the television back on by pressing the 
P
/
(or 
C/P.
on the front panel) or numeric
button on the remote control. 
4
To switch your television off, press the “ ” (On/Off) button again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the POWER (
) button on the remote control.
Result :
The screen is turned off and the Standby indicator
on the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
)
button again.
You can also switch the television back on by pressing the
P
/
(or 
C/P.
on the front panel) or numeric
button on the remote control. 
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
(On/Off) button on the front of the television. It is best to
unplug the set from the mains and aerial.
Switching Your Television On and Off
Front of the TV
o
6
Front of the TV
AA68-03541A-X12Eng  2005/04/28  09:15 AM  Page 9