Copystar cs-1635 사용자 가이드

Stop copying operations when a paper misfeed occurs. When a paper 
misfeed occurs, the indicator for the location of the paper misfeed will light 
up on the Operation Panel and either “J” plus a 2-digit number will be 
displayed as notification of the location of the paper misfeed.

With the Power Switch in the ON (|) position, refer to Removal 
Procedure on page 9-9 and clear the paper misfeed.

Paper misfeed in the 
optional Document 
Processor – Refer to 
page9-12.

The electrically charged section inside the main unit 

of the copier uses high voltage. Exercise caution in handling it to 
prevent electric shock.

The fixation section inside the main unit of the copier is 

extremely hot. Exercise caution in handling it to prevent getting 
burned.

*Do not attempt to reuse paper that has jammed before.

*When a sheet gets torn during removal, make sure that the remnants do 

not remain in the machine. Failure to completely remove remnants of torn 
pages can lead to paper misfeeds.

*The copier will start warm up operations after the paper misfeed 

processing has been completed. The paper misfeed indicator lamp will 
go off and the copier will be restored to the state it was in before the paper 
misfeed occurred.

When the paper misfeed has occurred in the cassette, use the procedure 
below to clear it.