Copystar cs-1635 사용자 가이드

The Auto Sleep Function is a function that automatically turns the copier 
off after a set period of time (1 to 240 minutes) has passed. “-” is displayed 
in the No. of Copies display and all other indicators and message display 
will be turned off.

This has been set to 30 minutes at shipping.

In the Sleep Mode state, the supply of electrical power to 

everything except the operating section is stopped. When the Power 
Switch is turned off, the supply of power to everything, including the 
operating section, is stopped.

The No. of Copies display will show a “-” for approximately 5 seconds 
after the Power Switch has been turned off.

Press [Energy Saver] in order to resume copying operations. The 
recovery time before copies can be made is less than 20 seconds.

The Auto Sleep Function is a power-saving function that automatically puts 
the copier into Sleep Mode when no copying operations have been 
performed for a set period of time.

In the case of copiers, the amount of time spent idling rather than copying 
is large, so the amount of power consumed during idle operation makes up 
the largest share of their power usage. The consumption of power during 
idling or when someone forgets to turn the copier off after work can be 
reduced through the copier unit automatically entering the Sleep Mode and 
the electric bill reduced as a result.

The time interval before the Auto Sleep Mode engages can be 

changed. (Refer to Sleep Mode Transition Time on page 5-22.)

The Auto Sleep Mode can be deselected. (Refer to Auto Sleep Setting on 
page 5-21.)