Copystar cs-1635 사용자 가이드

The copier will enter System Menu after warm up has been completed or 
when [Reset] has been pressed. The settings automatically set for the 
copier in System Menu are called the Default Settings. These settings can 
be freely changed to match the usage of the copier.

The following are the System Menu Items.

Change the settings as necessary in order to achieve the most efficient use 
of the copier. The factory default setting is indicated by an asterisk (*).

Outputs the content of the Default Settings.

---

02.Language

Set the language of the message display.

[Inch specifications]
English*
Francais
Espanol
Japanese
Portugues
[Metric specifications]
English
Deutsch
Francais
Espanol
Italiano

03.Image Quality

Sets the manuscript image quality that will be 
selected at the time the copier is turned on.

Text + Ph Dens.*
Photo Density
Text Density

04.Initial Dens.

Sets the copy exposure at the time the copier is 
turned on to Manual or Automatic.
There will be no display when Photo Density has 
been selected in 03.Image Quality.

Manual*
Auto

05.EcoPrint

Selects the initial value of the EcoPrint Mode when 
the power is turned on. The initial value of the Eco 
Mode can be set to on (Enable). Exposures will be 
lighter and less toner will be consumed when the 
EcoPrint Mode is used.

On: Enabled
Off: Disabled*

06.Density steps

Changes the number of the adjustment steps for the 
copy’s exposure. 0.5 - Setting this step enables even 
finer adjustment of the exposure.

1 Step*
0.5 Step

07.Auto Density

Adjusts the overall exposure of the copy when Auto 
Exposure Mode is used.

1(lightest) to 7(darkest) 
(*4)

Adjusts the central exposure value for the copier’s 
manual exposure (Text and Photo).

1(lightest) to 7(darkest) 
(*4)

09.Photo Density

Adjusts the central exposure value for the copier’s 
manual exposure (Photo).

1(lightest) to 7(darkest) 
(*4)