Copystar cs-1635 사용자 가이드

Follow the procedure listed below to operate in the System Menu.

Press [Exposure Adjustment] on both 
sides for 3 seconds. System Menu will be 
displayed.

Press 

U or V and select System Menu Items.

Each of System Menu Items can be selected by pressing the 

numeric keys.

Refer to "Procedure for Changing the Default Settings" regarding the 
following.

After completing each operation, press 

U or V to display 00.Setting 

done

.

The Auto Sleep mode will be entered after a set 
period of time has passed after the final copy has 
been produced or during which no operations have 
been performed.
If the Auto Sleep function interferes with your copy 
operations, disable the function. Before disabling the 
Auto Sleep function, you may want to try lengthening 
the amount of time before the Auto Sleep function 
engages (Sleep Mode Transition Time).

On: Enabled*
Off: Disabled

Sets the time interval prior to the automatic operation 
of the Auto Clear function when On (Enable) has 
been selected as the 50.Auto Clear setting.
This will not be displayed when 50.Auto Clear is set 
to Off.

10 to 270 (10-second 
units) (*90)

Sets the time interval prior to the automatic 
engagement of the Low Power mode after copy 
operations have been completed.

1, 5, 15, 30, 45, 60, 90, 
120, 180, 240 (minutes) 
(*15)

Sets the time interval prior to the automatic operation 
of the Auto Sleep function when On (Enable) has 
been selected as the 51.Auto Sleep setting.
This will not be displayed when 51.Auto Sleep is set 
to Off.

1, 5, 15, 30, 45, 60, 90, 
120, 180, 240 (minutes) 
(*30)

The Alarm can be set to sound when a key on the 
Operation Panel is pressed or in cases when errors 
occur, etc.

On: Enabled (sound 
alarm)*
Off: Disabled (no alarm)

Prints out a report that shows the number of copies 
made and the average amount of toner used 
(blackness ratio %) for each paper size.

---

System Menu:

00.Setting done