Iwatsu ADIX APS 빠른 설정 가이드

다운로드
페이지 12
To Answer Messages
When the [MESSAGE] button lamp is lit at your extension
Lift the receiver
Press the [MESSAGE] button until the desired
extension number is displayed
Press  
The system will automatically call back the extension
that left the message
Paging
Lift the receiver
Hold down the [PAGE] button
When you hear the confirmation tone, make your
announcement by speaking into the receiver
Release the [PAGE] button and hang up
Whisper Page
You may communicate with a busy station without
interrupting their call using the Whisper Page feature.
To communicate with a busy extension:
After calling a busy station, press the   button.
You may now speak to that extension
To Respond to Whisper Page
After receiving a whisper page while on a call,
Press the   button to speak with the extension that
called using the whisper page feature
Press the   button a second time to resume speaking
with the original calling party
Note:
  The original calling party cannot hear the
whisper page or your response to a whisper page.
To Respond to Whisper Page with a Text Message
After receiving a whisper page while on call follow
the procedures in Text Messaging feature
Personal Ring Tones
You may choose one of eight different ring tones to
distinguish your station from others.
To play a ring tone at your system extension
With your station idle press [FEAT] +  +  + -
To select a ring tone for your system extension
With your station idle press [FEAT] + +  + - + 
To restore default ring tone at your system
extension
With your station idle press [FEAT] +  +   +  + 
13
10
Exclusive Hold On Outside Line
A call on “exclusive” hold may only be picked up from
your extension.
While speaking on an outside call
Press the button for the outside line you are already
using. The green lamp on that outside line button will
flash slowly on your phone. The red lamp will stay lit
at other extensions.
To retrieve a call on Exclusive Hold
Press the same outside line button on your phone
again to be connected to the call
Flash
Flash allows you to receive a dial tone on the same
outside line that you are using without having to hang
up.  Flash may also be used to receive an intercom dial
tone to place another intercom call.
After you complete a call or if you make a dialing
mistake
Press [FLASH]
Dial the new number
To Use Centrex or PBX features
Press [S FLASH]
Dial the new number or feature code
If your phone does not have [FLASH] or [S FLASH]
buttons
Press [FEAT] then dial + for Flash
Press [FEAT] then dial + for Short Flash