Genius dv53 사용자 가이드
English
-11-
Writeable position
Write-Protected
Position
Writeable position
Write-Protected
Position
Getting Started
Loading the Battery
Before using the camera, end users must load NP60
rechargeable Li-ion Battery.
1. Follow the arrow direction and slide to eject the
battery cover.
2. Insert the batteries according to the correct polarity
marks ( + or -)
3. Close the battery cover firmly.
rechargeable Li-ion Battery.
1. Follow the arrow direction and slide to eject the
battery cover.
2. Insert the batteries according to the correct polarity
marks ( + or -)
3. Close the battery cover firmly.
Inserting and Removing an SD Card
The camera comes with internal memory (64MB) which allows you to store pictures,
movies, recorded voice and music. You can expand the memory capacity by using an
optional SD memory card up to 4GB. To insert a
memory card:
movies, recorded voice and music. You can expand the memory capacity by using an
optional SD memory card up to 4GB. To insert a
memory card:
1. Insert the memory card into the correct
position.
2. To remove an installed SD card, press the
card inwards to release it.
3. When the card pops out, gently remove it
from its slot.
NOTE
z
When a memory card is being used, movies and pictures are saved on the card rather
than on the built-in memory.
than on the built-in memory.
Protecting Data on an SD Card
SD card is read-only by locking the SD card. No
pictures, movies and voice can be recorded when the
SD card is locked. Make sure the lock is in writeable
position before recording any media.
pictures, movies and voice can be recorded when the
SD card is locked. Make sure the lock is in writeable
position before recording any media.