Gaggia titanium 작동 가이드

ENGLISH

• 38 •

ON/OFF TIME
OFF

9:30

then press “

∧∧∧∧∧” or “∨∨∨∨∨” to set the minutes and memorise the setting

by pressing “MENU/OK”.

Warning: if the on/off time settings coincide, the
machine will ignore both. After the times have been

set, the clock must be activated in order for the function to work.

Activating the automatic on/off function

Note: activating this function makes sense only if you
have already set the on/off times.

• Press “

∧∧∧∧∧” or “∨∨∨∨∨” to select the function:

CLOCK

enable it by pressing “MENU/OK”.

• The display will show:

CLOCK
OFF

In this case pressing “MENU/OK” will deactivate the function.
Choose to activate the function by pressing “

∧∧∧∧∧” or “∨∨∨∨∨” and when

CLOCK
ON

appears, memorise the setting by pressing “MENU/OK”.

When you exit the programming mode, the machine will check the set
parameters. If the current time falls within the set deactivation time,
the display will indicate:

ENERGY SAVING

Note: during the set deactivation period, the
machine can be restarted at any time by pressing

“MENU/OK”.
Later, to deactivate the machine again, go into the programming
mode by pressing “MENU/OK” and exit immediately by pressing
“ESC”.

RINSING CYCLE

With this function, all the parts involved in the coffee dispensing
process undergo a washing cycle with water.

During the wash cycle it is recommended that a person
be on hand to supervise the operation. Before per-

forming the rinsing cycle fill the water tank.

• Select the function by pressing the key “

∧∧∧∧∧” or “∨∨∨∨∨”:

RINSING CYCLE

• Press the key “MENU/OK” to start the rinsing cycle, the display

shows:

RINSING CYCLE

The machine brews about half quantity of the water contained in the
tank from the dispenser.

Then the cycle stops automatically, and the display shows:

SELECT PRODUCT
READY FOR USE

FACTORY SETTINGS

This function allows you to restore all the machine operating parameters
originally set by the manufacturer.

• After accessing the programming mode, press “

∧∧∧∧∧” or “∨∨∨∨∨” to select

the function:

FACTORY SETTINGS

then enable it by pressing “MENU/OK”. The following indication
will appear:

FACTORY SETTINGS
NO

• Choose whether you want to restore the factory settings by pressing

“

∧∧∧∧∧” or “∨∨∨∨∨” and press “MENU/OK” to confirm your selection.

Caution: when you restore all the factory settings, you
will lose any custom settings you have made on the

machine.

LEGAL INFORMATION

• This instruction book contains the information you need in order to

use and upkeep your appliance correctly.

• The information should be viewed as a guideline for using and

upkeeping your coffee maker in safety. The information is not